Installing SanFoot Products

ALWAYS Keep SanFoot Faces Free of Adhesive

Remove excess adhesive from each sheet as you progress and prior to installing the next sheet. Use a clean, moist, natural sponge to remove excess adhesive and dry the surface with a lint-free towel. It is very important to change water frequently in order to maintain cleanliness and not to streak the appearance. Adhesive residue will be very difficult to remove so insure that ALL adhesive is removed and the SanFoot is cleaned with clean moist sponge. Clean each sheets as it is installed. DO NOT install SanFoot with temporary lighting. Installation with permanent lighting is recommended. Sufficient lighting will insure the ability to see air pockets, bubbles and other installation imperfections that may occur.

Copyrights © 2013 & All Rights Reserved by Jacaranda Inc.

Web Design by Paul West for 2020 Webdesigns