Installing SanFoot Products

Working With Internal Corners

Installing around internal corners is simple

  • 1. Make sure there is 3" or more either side of the corner before terminating the SanFoot
  • 2. Moisten the face of the SanFoot with a moist sponge before, during and after folding
  • 3. Insure you are always folding with the grain
  • 4. Always overlap and double cut at seams. Be sure not to cut into the drywall.
  • 5. Always use a new blade with each seam
  • 6. Always keep the veneer thoroughly clean of adhesive using clean water and sponge

Copyrights © 2013 & All Rights Reserved by Jacaranda Inc.

Web Design by Paul West for 2020 Webdesigns