Installing SanFoot Products

Bonding SanFoot to Wood Substrates

All surfaces should be completely free of excess dust, oils or other foreign matter and maintained as smooth as possible. All seam joints in the substrate should be mudded and sanded to fill all gaps for a completely smooth surface. Prime all surface areas with Pro-935 by Roman Decorating Products before starting the installation of SanFoot. Keep in mind that your substrate will not allow a lot of moisture to be absorbed, therefore you will use a little less adhesive in this application than over drywall.

REFER TO SANFOOT FABRICATION GUIDE FOR LAMINATING SANFOOT TO WOOD PANELS AND DOORS

Copyrights © 2013 & All Rights Reserved by Jacaranda Inc.

Web Design by Paul West for 2020 Webdesigns